Engineering & Construction Inspection Department

Site Plan Requirements

All site plans must contain the following information and must be up-to date:

1. Street address
2. Legal description
3. Property Owner
4. Zoning
5. North arrow
6. Plan drawn to useable scale
7. Scale indicated
8. Size and location of all existing buildings and structures
9. Size and location of all easements
10. All lot dimensions and building setbacks
11. Location and size of proposed new structures/additions.
12. Distance to all lot boundaries from existing and proposed structures
13. Structure location and layout shall match floor plans
14. Location of all driveways and parking
15. Limits of disturbance
16. Existing and proposed landscaping
17. Location and size of permanent LP gas tanks
18. Location of all exterior HVAC equipment
19. Location of existing adjacent structures
20. Location of all utilities
21. Basic topography with minimal spot elevations showing drainage patterns
22. Tabulation of all existing and proposed impervious areas

Depending on the project, additional information will be required to be shown on the site plan or submitted with the site plan as follows:

• Critical Area Project Application (Over 50% of site)

• Critical Area Project Application (Under 50% of site)

• Detailed topography and spot elevations

• Stormwater Management Best Management Practices (BMPs) and calculations

• Landscape Plan

• Wetland delineations

• Zoning density calculations

• Required parking calculations

Top